These See Through Oil Filter Assemblies allow the user to visually see the oil pumping through the filter, which helps to determine the condition of the oil. When oil is not being pumped through the filter, the filter assemblies can be quickly drained by using a small shot of air to the air fitting on the side of the inlet opening. The oil will empty out of the filter assembly in seconds exposing the filter element and filtered particles, even when filtering non transparent fluids like dirty engine oil. This allows the user to visually see any particles and contaminants that were filtered out of the oil system. Which will help to determine if the contaminants and particles are from normal use or from bearings and other components excessively wearing in the engine or machinery supplying the filter assembly.
6″ Hi-Flow See Through Filter Assembly with #12 Ports and 115 Micron Element, for running 60 weight or heavier oil. For Supercharged Hemi’s, Pro Mod and Extreme Engine combinations pushing high volumes of oil.
When using 50 weight or lighter oil a 60 micron element is recommended. When using 60 weight or heavier oil A 115 micron element is recommended.
Filters have 2 Inlet and 2 Outlet Openings that are threaded for #12 O-Ring Boss – 1 1/16-12 TPI fittings. The Inlet and Outlet Ports are machined to 7/8” diameter and will flow a #16 line when using #12 O-Ring Boss to #16 JIC bored out fittings. All 4 ports can be used, but #16 fittings can not go in and out of the same side of the filter assembly.
Sold as Kit including; Filter Assembly, 115 Micron Element, and Bracket Kit
(**WARNING Filter Nuts and Bracket bolts are shipped un-tightened they need to be tighten before filter is used.**)