These See Through Oil Filter Assemblies allow the user to visually see the oil pumping through the filter, which helps to determine the condition of the oil. When oil is not being pumped through the filter, the filter assemblies can be quickly drained by using a small shot of air to the air fitting on the side of the inlet opening. The oil will empty out of the filter assembly in seconds exposing the filter element and filtered particles, even when filtering non transparent fluids like dirty engine oil. This allows the user to visually see any particles and contaminants that were filtered out of the oil system. Which will help to determine if the contaminants and particles are from normal use or from bearings and other components excessively wearing in the engine or machinery supplying the filter assembly.
6″ Hi-Flow See Through Filter Assembly with #12 Ports and 60 Micron Element, for running 50 weight or lighter oil. For Supercharged Hemi’s, Pro Mod and Extreme Engine combinations pushing high volumes of oil.
When running 50 weight or lighter oil a 60 Micron Filter Element is recommended. When running 60 weight or heavier oil the 6" Hi-Flow or 6" Screw-On with a 115 Micron Filter Element is recommended.
Sold as Kit including; Filter Assembly, 60 Micron Element, and Bracket Kit
(**WARNING Filter Nuts and Bracket bolts are shipped un-tightened they need to be tighten before filter is used.**)