Chevrolet K1500 Suburban Disc Brake Caliper - ACDelco, BBB Industries, Cardone, Centric, Powerstop, Raybestos - Front Right, Front Left

Unloaded Caliper - 1996 Chevrolet K1500 Suburban Disc Brake Caliper - Front Right Cardone

Unloaded Caliper - Front Right

with Metal Piston Installation Hardware Included

Position: Front Right

Core Price: $16.20 Our Price: $40.46

Part # P311-595D241 Manufacturer # 18-4299 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 18014745, 4746366

Product Attributes:

Bleeder Port Size: M10x1.5
Brake Caliper Finish: Oil Emulsion
Caliper Color: Gray
E-Waste: No
FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
Inlet Port Size: M10x1.5
Installation Hardware Included: Yes
Mounting Bolts Included: Yes
Package Contents: Caliper; Hardware Kit
Pads Included: No
Piston Material: Steel
Piston Size (OD) (in): 2.935
Piston Size (OD) (mm): 74.549
Product Condition: Remanufactured

About Cardone

Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers ar ... Read More About This Disc Brake Caliper

Qty:

Vehicle	Fuel Type	Position
1996 Chevrolet K1500 Suburban	GAS	Front Right

Vehicle

1996 Chevrolet K1500 Suburban

Fuel Type

GAS

Position

Front Right

Unloaded Caliper - 1996 Chevrolet K1500 Suburban Disc Brake Caliper - Front Left Cardone

Unloaded Caliper - Front Left

with Metal Piston Installation Hardware Included

Position: Front Left

Core Price: $16.20 Our Price: $40.46

Part # P311-2A3A81F Manufacturer # 18-4300 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 18014744, 4746367

Product Attributes:

Bleeder Port Size: M10x1.5
Brake Caliper Finish: Oil Emulsion
Caliper Color: Gray
E-Waste: No
FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
Inlet Port Size: M10x1.5
Installation Hardware Included: Yes
Mounting Bolts Included: Yes
Package Contents: Caliper; Hardware Kit
Pads Included: No
Piston Material: Steel
Piston Size (OD) (in): 2.935
Piston Size (OD) (mm): 74.549
Product Condition: Remanufactured

About Cardone

Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers ar ... Read More About This Disc Brake Caliper

Qty:

Vehicle	Fuel Type	Position
1996 Chevrolet K1500 Suburban	GAS	Front Left

Vehicle

1996 Chevrolet K1500 Suburban

Fuel Type

GAS

Position

Front Left

Unloaded Caliper - 1996 Chevrolet K1500 Suburban Disc Brake Caliper - Front Right Cardone

Unloaded Caliper - Front Right

with Metal Piston Supplied with Standard Boots Installation Hardware Included

Position: Front Right

Core Price: $24.30 Our Price: $40.61

Part # P311-357142B Manufacturer # 18-4297 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 18014748, 4746354

Product Attributes:

Bleeder Port Size: M10x1.5
Brake Caliper Finish: Oil Emulsion
Caliper Color: Gray
E-Waste: No
FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
Inlet Port Size: M10x1.5
Installation Hardware Included: Yes
Mounting Bolts Included: Yes
Package Contents: Caliper; Hardware Kit
Pads Included: No
Piston Material: Steel
Piston Size (OD) (in): 3.145
Piston Size (OD) (mm): 79.883
Product Condition: Remanufactured

About Cardone

Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers ar ... Read More About This Disc Brake Caliper

Qty:

Vehicle	Fuel Type	Position
1996 Chevrolet K1500 Suburban	DIESEL	Front Right

Vehicle

1996 Chevrolet K1500 Suburban

Fuel Type

DIESEL

Position

Front Right

Unloaded Caliper - 1996 Chevrolet K1500 Suburban Disc Brake Caliper - Front Left Cardone

Unloaded Caliper - Front Left

with Metal Piston Supplied with Standard Boots Installation Hardware Included

Position: Front Left

Core Price: $24.30 Our Price: $40.61

Part # P311-0E2505E Manufacturer # 18-4298 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 18014747, 4746355

Product Attributes:

Bleeder Port Size: M10x1.5
Brake Caliper Finish: Oil Emulsion
Caliper Color: Gray
E-Waste: No
FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
Inlet Port Size: M10x1.5
Installation Hardware Included: Yes
Mounting Bolts Included: Yes
Package Contents: Caliper; Hardware Kit
Pads Included: No
Piston Material: Steel
Piston Size (OD) (in): 3.145
Piston Size (OD) (mm): 79.883
Product Condition: Remanufactured

About Cardone

Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers ar ... Read More About This Disc Brake Caliper

Qty:

Vehicle	Fuel Type	Position
1996 Chevrolet K1500 Suburban	DIESEL	Front Left

Vehicle

1996 Chevrolet K1500 Suburban

Fuel Type

DIESEL

Position

Front Left

Centric Premium Semi-Loaded Disc Brake Calipers - 1996 Chevrolet K1500 Suburban Disc Brake Caliper - Front Left Centric

Centric Premium Semi-Loaded Disc Brake Calipers - Front Left

Centric Semi-Loaded Brake Caliper
11" Rear Drum 6 Lug
Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets

Position: Front Left

Core Price: $15.00 Our Price: $20.74

Part # P311-062E95D Manufacturer # 141.66018 Condition: Remanufactured

Product Attributes:

Abutment Clips Included: Yes
Attribute ID (Type): California Proposition 65
Bleeder Screw Included: Yes
Bleeder Thread Diameter:
- 10.000
- M10x1.5
Bore Size mm: 75
Bore Size(s) millimeters: 75
Bracket Included: No
Bracket Mounting Bolts Include: No
Bracket Required (Y/N): No
Bracket Required Y/N: No
Caliper & Pad Hardware Include: Yes
Caliper Color: Gray
Friction Materials Standards Institute Pad Number: 10x.03690
Grade Type: Regular
Inlet Fitting Type: Banjo
Inlet Thread Diameter:
- 10.000
- M10x1.5
Mounting Bracket Included: No
Pads Included: No
Piston 1 Diameter: 75.000
Piston 2 Diameter: 75.000
Piston Material: Steel
Prop 65 [cntrc]: California Proposition 65
Rust Preventative Coating: Yes

About Centric

Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to e ... Read More About This Disc Brake Caliper

Qty:

Vehicle	Position
1996 Chevrolet K1500 Suburban	Front Left

Vehicle

1996 Chevrolet K1500 Suburban

Position

Front Left

Centric Premium Semi-Loaded Disc Brake Calipers - 1996 Chevrolet K1500 Suburban Disc Brake Caliper - Front Right Centric

Centric Premium Semi-Loaded Disc Brake Calipers - Front Right

Centric Semi-Loaded Brake Caliper
11" Rear Drum 6 Lug
Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets

Position: Front Right

Core Price: $15.00 Our Price: $20.74

Part # P311-543C489 Manufacturer # 141.66017 Condition: Remanufactured

Product Attributes:

Abutment Clips Included: Yes
Attribute ID (Type): California Proposition 65
Bleeder Screw Included: Yes
Bleeder Thread Diameter:
- 10.000
- M10x1.5
Bore Size mm: 75
Bore Size(s) millimeters: 75
Bracket Included: No
Bracket Mounting Bolts Include: No
Bracket Required (Y/N): No
Bracket Required Y/N: No
Caliper & Pad Hardware Include: Yes
Caliper Color: Gray
Friction Materials Standards Institute Pad Number: 10x.03690
Grade Type: Regular
Inlet Fitting Type: Banjo
Inlet Thread Diameter:
- 10.000
- M10x1.5
Mounting Bracket Included: No
Pads Included: No
Piston 1 Diameter: 75.000
Piston 2 Diameter: 75.000
Piston Material: Steel
Prop 65 [cntrc]: California Proposition 65
Rust Preventative Coating: Yes

About Centric

Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to e ... Read More About This Disc Brake Caliper

Qty:

Vehicle	Position
1996 Chevrolet K1500 Suburban	Front Right

Vehicle

1996 Chevrolet K1500 Suburban

Position

Front Right

Unloaded Caliper - 1996 Chevrolet K1500 Suburban Disc Brake Caliper - Front Right Cardone

Unloaded Caliper - Front Right

with Metal Piston Supplied with Heavy Duty silicone boots and new hardware Installation Hardware Included

Position: Front Right

Core Price: $24.30 Our Price: $47.17

Part # P311-5305372 Manufacturer # 18-4297HD Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 18014748, 4746354

Product Attributes:

Bleeder Port Size: M10x1.5
Brake Caliper Finish: Oil Emulsion
Caliper Color: Gray
E-Waste: No
FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
Inlet Port Size: M10x1.5
Installation Hardware Included: Yes
Mounting Bolts Included: Yes
Package Contents: Caliper; Hardware Kit
Pads Included: No
Piston Material: Steel
Piston Size (OD) (in): 3.145
Piston Size (OD) (mm): 79.883
Product Condition: Remanufactured

About Cardone

Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers ar ... Read More About This Disc Brake Caliper

Qty:

Vehicle	Fuel Type	Position
1996 Chevrolet K1500 Suburban	DIESEL	Front Right

Vehicle

1996 Chevrolet K1500 Suburban

Fuel Type

DIESEL

Position

Front Right

Unloaded Caliper - 1996 Chevrolet K1500 Suburban Disc Brake Caliper - Front Left Cardone

Unloaded Caliper - Front Left

with Metal Piston Supplied with Heavy Duty silicone boots and new hardware Installation Hardware Included

Position: Front Left

Core Price: $24.30 Our Price: $47.17

Part # P311-110C0E4 Manufacturer # 18-4298HD Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 18014747, 4746355

Product Attributes:

Bleeder Port Size: M10x1.5
Brake Caliper Finish: Oil Emulsion
Caliper Color: Gray
E-Waste: No
FAQs:
- A Silicone Grease Is Used On Floating Caliper Mounting Pins.
- A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
- As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
- Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
- Brakes Squeal All Of The Time. What's Causing The Squeal?
- Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
- Car Pulls To One Side During Braking. Why?
- Could Calipers Be The Cause Of A Low Brake Pedal?
- Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
- Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
- New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
- Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
- What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
- What Type Of Grease Is Used On Floating Caliper Mounting Pins?
Features and Benefits:
- A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
- As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
- Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
- Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
- New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
- New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
- New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
- New Washers Are Included Where Applicable For A Proper Seal.
- Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
- Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
- Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
Inlet Port Size: M10x1.5
Installation Hardware Included: Yes
Mounting Bolts Included: Yes
Package Contents: Caliper; Hardware Kit
Pads Included: No
Piston Material: Steel
Piston Size (OD) (in): 3.145
Piston Size (OD) (mm): 79.883
Product Condition: Remanufactured

About Cardone

Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers ar ... Read More About This Disc Brake Caliper

Qty:

Vehicle	Fuel Type	Position
1996 Chevrolet K1500 Suburban	DIESEL	Front Left

Vehicle

1996 Chevrolet K1500 Suburban

Fuel Type

DIESEL

Position

Front Left

Centric Posi-Quiet Loaded Disc Brake Calipers - 1996 Chevrolet K1500 Suburban Disc Brake Caliper - Front Right Centric

Centric Posi-Quiet Loaded Disc Brake Calipers - Front Right

Posi Quiet Loaded Caliper
13" Rear Drum 8 Lug
Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish.

Position: Front Right

Core Price: $20.00 Our Price: $49.33

Part # P311-4AE033F Manufacturer # 142.66019 Condition: Remanufactured

Product Attributes:

Abutment Clips Included: Yes
Bleeder Thread Diameter: 10.000
Friction Materials Standards Institute Pad Number: 10x.03700
Grade Type: Regular
Inlet Thread Diameter:
- 10.0
- 10.000
Pads Included: Yes
Piston 1 Diameter: 80.000
Piston 2 Diameter: 80.000
Piston Material: Steel
Prop 65 [cntrc]: California Proposition 65

About Centric

Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to e ... Read More About This Disc Brake Caliper

Qty:

Vehicle	Position
1996 Chevrolet K1500 Suburban	Front Right

Vehicle

1996 Chevrolet K1500 Suburban

Position

Front Right

Centric Posi-Quiet Loaded Disc Brake Calipers - 1996 Chevrolet K1500 Suburban Disc Brake Caliper - Front Left Centric

Centric Posi-Quiet Loaded Disc Brake Calipers - Front Left

Posi Quiet Loaded Caliper
13" Rear Drum 8 Lug
Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish.

Position: Front Left

Core Price: $20.00 Our Price: $49.33

Part # P311-4BD248D Manufacturer # 142.66020 Condition: Remanufactured

Product Attributes:

Abutment Clips Included: Yes
Bleeder Thread Diameter: 10.000
Friction Materials Standards Institute Pad Number: 10x.03700
Grade Type: Regular
Inlet Thread Diameter:
- 10.0
- 10.000
Pads Included: Yes
Piston 1 Diameter: 80.000
Piston 2 Diameter: 80.000
Piston Material: Steel
Prop 65 [cntrc]: California Proposition 65

About Centric

Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to e ... Read More About This Disc Brake Caliper

Qty:

Vehicle	Position
1996 Chevrolet K1500 Suburban	Front Left

Vehicle

1996 Chevrolet K1500 Suburban

Position

Front Left

Finish Selecting Your Vehicle

Shop By Brand

_{1996 Chevrolet K1500 Suburban} Disc Brake Caliper