change/add vehicle

Finish Selecting Your Vehicle

Choose your Engine for your 2001 Chevrolet Monte Carlo

6 Cyl 3.4L
6 Cyl 3.8L

Shop By Brand

These brands are available based on your search.

ACDelco
ACDelco
Autopart International
Autopart International
BBB Industries
BBB Industries
CARQUEST
CARQUEST
Cardone
Cardone
Centric
Centric
Dynamic Friction
Dynamic Friction
Powerstop
Powerstop
Raybestos
Raybestos

2001 Chevrolet Monte Carlo Disc Brake Caliper

Showing 1 - 10 of 59 products

Unloaded Caliper w/Bracket - Rear Left
  • with Metal Piston Supplied with Mounting Bracket Supplied with Standard Boots Installation Hardware Included
Rear Left
$14.40 $46.78

P311-2DE00D2    18-B4644  Remanufactured

18029935

Product Attributes:
  • Bleeder Port Size: M10x1.5
  • Brake Caliper Finish: Oil Emulsion
  • Caliper Color: Gray
  • E-Waste: No
  • FAQs:
    • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • Brakes Squeal All Of The Time. What's Causing The Squeal?
    • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • Car Pulls To One Side During Braking. Why?
    • Could Calipers Be The Cause Of A Low Brake Pedal?
    • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
  • Features and Benefits:
    • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
    • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
    • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
    • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
    • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
    • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
    • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
    • New Washers Are Included Where Applicable For A Proper Seal.
    • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
    • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
    • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
  • Inlet Port Size: M10x1.5
  • Installation Hardware Included: Yes
  • Mounting Bolts Included: No
  • Package Contents: Caliper; Bracket; Hardware Kit
  • Pads Included: No
  • Piston Material: Steel
  • Piston Size (OD) (in): 1.495
  • Piston Size (OD) (mm): 37.973
  • Product Condition: Remanufactured
About Cardone
Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers ar ... Read More About This Disc Brake Caliper
Qty:
Additional Fitment Information:
Vehicle Position
2001 Chevrolet Monte Carlo Rear Left
Additional Fitment Information:
2001 Chevrolet Monte Carlo
Rear Left
Unloaded Caliper w/Bracket - Rear Right
  • with Metal Piston Supplied with Mounting Bracket Supplied with Standard Boots Installation Hardware Included
Rear Right
$14.40 $46.78

P311-1D477BD    18-B4645  Remanufactured

18029936

Product Attributes:
  • Bleeder Port Size: M10x1.5
  • Brake Caliper Finish: Oil Emulsion
  • Caliper Color: Gray
  • E-Waste: No
  • FAQs:
    • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • Brakes Squeal All Of The Time. What's Causing The Squeal?
    • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • Car Pulls To One Side During Braking. Why?
    • Could Calipers Be The Cause Of A Low Brake Pedal?
    • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
  • Features and Benefits:
    • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
    • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
    • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
    • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
    • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
    • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
    • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
    • New Washers Are Included Where Applicable For A Proper Seal.
    • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
    • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
    • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
  • Inlet Port Size: M10x1.5
  • Installation Hardware Included: Yes
  • Mounting Bolts Included: No
  • Package Contents: Caliper; Bracket; Hardware Kit
  • Pads Included: No
  • Piston Material: Steel
  • Piston Size (OD) (in): 1.495
  • Piston Size (OD) (mm): 37.973
  • Product Condition: Remanufactured
About Cardone
Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers ar ... Read More About This Disc Brake Caliper
Qty:
Additional Fitment Information:
Vehicle Position
2001 Chevrolet Monte Carlo Rear Right
Additional Fitment Information:
2001 Chevrolet Monte Carlo
Rear Right
Unloaded Caliper w/Bracket - Front Right
  • with Metal Piston Supplied with Mounting Bracket Supplied with Standard Boots Installation Hardware Included
Front Right
$17.10 $42.71

P311-3E9E33D    18-B4639A  Remanufactured

18029819,  18046197

Product Attributes:
  • Bleeder Port Size: M10x1.5
  • Brake Caliper Finish: Oil Emulsion
  • Caliper Color: Gray
  • E-Waste: No
  • FAQs:
    • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • Brakes Squeal All Of The Time. What's Causing The Squeal?
    • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • Car Pulls To One Side During Braking. Why?
    • Could Calipers Be The Cause Of A Low Brake Pedal?
    • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
  • Features and Benefits:
    • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
    • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
    • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
    • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
    • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
    • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
    • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
    • New Washers Are Included Where Applicable For A Proper Seal.
    • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
    • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
    • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
  • Inlet Port Size: M10x1.5
  • Installation Hardware Included: Yes
  • Mounting Bolts Included: No
  • Package Contents: Caliper; Bracket; Hardware Kit
  • Pads Included: No
  • Piston Material: Steel
  • Piston Size (OD) (in): 2.497
  • Piston Size (OD) (mm): 63.4238
  • Product Condition: Remanufactured
About Cardone
Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers ar ... Read More About This Disc Brake Caliper
Qty:
Additional Fitment Information:
Vehicle Position
2001 Chevrolet Monte Carlo Front Right
Additional Fitment Information:
2001 Chevrolet Monte Carlo
Front Right
Centric Premium Semi-Loaded Disc Brake Calipers - Front Left
  • Centric Semi-Loaded Brake Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
Front Left
$5.00 $37.89

P311-4966D36    141.62122  Remanufactured

Product Attributes:
  • Abutment Clips Included: Yes
  • Attribute ID (Type): California Proposition 65
  • Bleeder Screw Included: Yes
  • Bleeder Thread Diameter:
    • 10.000
    • M10x1.5
  • Bore Size mm: 63.5
  • Bore Size(s) millimeters: 63.5
  • Bracket Included: Yes
  • Bracket Mounting Bolts Include: No
  • Bracket Required (Y/N): Yes
  • Bracket Required Y/N: Yes
  • Caliper & Pad Hardware Include: Yes
  • Caliper Color: Gray
  • Friction Materials Standards Institute Pad Number: 10x.06990
  • Grade Type: Regular
  • Inlet Fitting Type: Banjo
  • Inlet Thread Diameter:
    • 10.0
    • 10.000
    • M10x1.5
  • Mounting Bracket Included: Yes
  • Pads Included: No
  • Piston 1 Diameter: 63.500
  • Piston 2 Diameter: 63.500
  • Piston Material: Steel
  • Prop 65 [cntrc]: California Proposition 65
  • Rust Preventative Coating: Yes
About Centric
Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to e ... Read More About This Disc Brake Caliper
Qty:
Additional Fitment Information:
Vehicle Position
2001 Chevrolet Monte Carlo Front Left
Additional Fitment Information:
2001 Chevrolet Monte Carlo
Front Left
Centric Premium Semi-Loaded Disc Brake Calipers - Front Right
  • Centric Semi-Loaded Brake Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
Front Right
$5.00 $37.89

P311-5935965    141.62121  Remanufactured

Product Attributes:
  • Abutment Clips Included: Yes
  • Attribute ID (Type): California Proposition 65
  • Bleeder Screw Included: Yes
  • Bleeder Thread Diameter:
    • 10.000
    • M10x1.5
  • Bore Size mm: 63.5
  • Bore Size(s) millimeters: 63.5
  • Bracket Included: Yes
  • Bracket Mounting Bolts Include: No
  • Bracket Required (Y/N): Yes
  • Bracket Required Y/N: Yes
  • Caliper & Pad Hardware Include: Yes
  • Caliper Color: Gray
  • Friction Materials Standards Institute Pad Number: 10x.06990
  • Grade Type: Regular
  • Inlet Fitting Type: Banjo
  • Inlet Thread Diameter:
    • 10.0
    • 10.000
    • M10x1.5
  • Mounting Bracket Included: Yes
  • Pads Included: No
  • Piston 1 Diameter: 63.500
  • Piston 2 Diameter: 63.500
  • Piston Material: Steel
  • Prop 65 [cntrc]: California Proposition 65
  • Rust Preventative Coating: Yes
About Centric
Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to e ... Read More About This Disc Brake Caliper
Qty:
Additional Fitment Information:
Vehicle Position
2001 Chevrolet Monte Carlo Front Right
Additional Fitment Information:
2001 Chevrolet Monte Carlo
Front Right
Unloaded Caliper w/Bracket - Front Left
  • with Metal Piston Supplied with Mounting Bracket Supplied with Standard Boots Installation Hardware Included
Front Left
$17.10 $42.78

P311-498AC07    18-B4638A  Remanufactured

18029818,  18046196

Product Attributes:
  • Bleeder Port Size: M10x1.5
  • Brake Caliper Finish: Oil Emulsion
  • Caliper Color: Gray
  • E-Waste: No
  • FAQs:
    • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • Brakes Squeal All Of The Time. What's Causing The Squeal?
    • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • Car Pulls To One Side During Braking. Why?
    • Could Calipers Be The Cause Of A Low Brake Pedal?
    • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
  • Features and Benefits:
    • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
    • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
    • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
    • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
    • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
    • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
    • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
    • New Washers Are Included Where Applicable For A Proper Seal.
    • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
    • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
    • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
  • Inlet Port Size: M10x1.5
  • Installation Hardware Included: Yes
  • Mounting Bolts Included: No
  • Package Contents: Caliper; Bracket; Hardware Kit
  • Pads Included: No
  • Piston Material: Steel
  • Piston Size (OD) (in): 2.497
  • Piston Size (OD) (mm): 63.4238
  • Product Condition: Remanufactured
About Cardone
Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers ar ... Read More About This Disc Brake Caliper
Qty:
Additional Fitment Information:
Vehicle Position
2001 Chevrolet Monte Carlo Front Left
Additional Fitment Information:
2001 Chevrolet Monte Carlo
Front Left
Centric Premium Semi-Loaded Disc Brake Calipers - Rear Left
  • Centric Semi-Loaded Brake Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
Rear Left
$15.00 $48.26

P311-03AA3F2    141.62554  Remanufactured

Product Attributes:
  • Abutment Clips Included: Yes
  • Attribute ID (Type): California Proposition 65
  • Bleeder Screw Included: Yes
  • Bleeder Thread Diameter:
    • 10.000
    • M10x1.5
  • Bracket Included: Yes
  • Bracket Mounting Bolts Include: No
  • Bracket Required (Y/N): Yes
  • Bracket Required Y/N: Yes
  • Caliper & Pad Hardware Include: Yes
  • Caliper Color: Gray
  • Friction Materials Standards Institute Pad Number: 10x.06980
  • Grade Type: Regular
  • Inlet Fitting Type: Banjo
  • Inlet Thread Diameter:
    • 10.0
    • 10.000
    • M10x1.5
  • Mounting Bracket Included: Yes
  • Pads Included: No
  • Piston 1 Diameter: 38.000
  • Piston 2 Diameter: 38.000
  • Piston Material: Steel
  • Prop 65 [cntrc]: California Proposition 65
  • Rust Preventative Coating: Yes
About Centric
Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to e ... Read More About This Disc Brake Caliper
Qty:
Additional Fitment Information:
Vehicle Position
2001 Chevrolet Monte Carlo Rear Left
Additional Fitment Information:
2001 Chevrolet Monte Carlo
Rear Left
Centric Premium Semi-Loaded Disc Brake Calipers - Rear Right
  • Centric Semi-Loaded Brake Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
Rear Right
$15.00 $48.26

P311-1C71286    141.62553  Remanufactured

Product Attributes:
  • Abutment Clips Included: Yes
  • Attribute ID (Type): California Proposition 65
  • Bleeder Screw Included: Yes
  • Bleeder Thread Diameter:
    • 10.000
    • M10x1.5
  • Bracket Included: Yes
  • Bracket Mounting Bolts Include: No
  • Bracket Required (Y/N): Yes
  • Bracket Required Y/N: Yes
  • Caliper & Pad Hardware Include: Yes
  • Caliper Color: Gray
  • Friction Materials Standards Institute Pad Number: 10x.06980
  • Grade Type: Regular
  • Inlet Fitting Type: Banjo
  • Inlet Thread Diameter:
    • 10.0
    • 10.000
    • M10x1.5
  • Mounting Bracket Included: Yes
  • Pads Included: No
  • Piston 1 Diameter: 38.000
  • Piston 2 Diameter: 38.000
  • Piston Material: Steel
  • Prop 65 [cntrc]: California Proposition 65
  • Rust Preventative Coating: Yes
About Centric
Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to e ... Read More About This Disc Brake Caliper
Qty:
Additional Fitment Information:
Vehicle Position
2001 Chevrolet Monte Carlo Rear Right
Additional Fitment Information:
2001 Chevrolet Monte Carlo
Rear Right
Unloaded Caliper - Front Right
  • with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
Front Right
$17.10 $47.17

P311-51A9B6D    18-4639  Remanufactured

18024957,  18029819,  18046197,  18046201

Product Attributes:
  • Bleeder Port Size: M10x1.5
  • Brake Caliper Finish: Oil Emulsion
  • Caliper Color: Gray
  • E-Waste: No
  • FAQs:
    • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • Brakes Squeal All Of The Time. What's Causing The Squeal?
    • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • Car Pulls To One Side During Braking. Why?
    • Could Calipers Be The Cause Of A Low Brake Pedal?
    • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
  • Features and Benefits:
    • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
    • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
    • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
    • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
    • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
    • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
    • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
    • New Washers Are Included Where Applicable For A Proper Seal.
    • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
    • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
    • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
  • Inlet Port Size: M10x1.5
  • Installation Hardware Included: Yes
  • Mounting Bolts Included: No
  • Package Contents: Caliper; Hardware Kit
  • Pads Included: No
  • Piston Material: Steel
  • Piston Size (OD) (in): 2.497
  • Piston Size (OD) (mm): 63.4238
  • Product Condition: Remanufactured
About Cardone
Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers ar ... Read More About This Disc Brake Caliper
Qty:
Additional Fitment Information:
Vehicle Position
2001 Chevrolet Monte Carlo Front Right
Additional Fitment Information:
2001 Chevrolet Monte Carlo
Front Right
Unloaded Caliper - Front Left
  • with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
Front Left
$17.10 $47.17

P311-3F4DA9D    18-4638  Remanufactured

18024956,  18029818,  18046196,  18046200

Product Attributes:
  • Bleeder Port Size: M10x1.5
  • Brake Caliper Finish: Oil Emulsion
  • Caliper Color: Gray
  • E-Waste: No
  • FAQs:
    • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • Brakes Squeal All Of The Time. What's Causing The Squeal?
    • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • Car Pulls To One Side During Braking. Why?
    • Could Calipers Be The Cause Of A Low Brake Pedal?
    • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
  • Features and Benefits:
    • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
    • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
    • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
    • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
    • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
    • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
    • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
    • New Washers Are Included Where Applicable For A Proper Seal.
    • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
    • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
    • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
  • Inlet Port Size: M10x1.5
  • Installation Hardware Included: Yes
  • Mounting Bolts Included: No
  • Package Contents: Caliper; Hardware Kit
  • Pads Included: No
  • Piston Material: Steel
  • Piston Size (OD) (in): 2.497
  • Piston Size (OD) (mm): 63.4238
  • Product Condition: Remanufactured
About Cardone
Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers ar ... Read More About This Disc Brake Caliper
Qty:
Additional Fitment Information:
Vehicle Position
2001 Chevrolet Monte Carlo Front Left
Additional Fitment Information:
2001 Chevrolet Monte Carlo
Front Left

Showing 1 - 10 of 59 products